MyLaps Trackside / X2

MyLaps Trackside and X2 timing systems can relay results over RMonitor. Outlap’s timing bridge forwards that feed to the live board.

Live

Enable the relay.

In Trackside / X2, open Settings → Outputs and enable the RMonitor / results relay. The default port is 50000.

Run the bridge:

node bridge.mjs --event <eventId> --key <outlapApiKey> --host 127.0.0.1 --port 50000 --vendor trackside

Check the feed in Race Control, then verify transponders on the Paddock tab.

Passings instead of RMonitor

If you extract passings yourself, for example from a Speedhive or X2 export, you can send them directly. The stream endpoint accepts passings objects with a transponder or car number, a lap number and a lap time:

{
  "vendor": "trackside",
  "passings": [
    { "transponder": "MX-4421", "number": "12", "lap_number": 5, "lap_time": "1:28.420" }
  ]
}

File import

X2 results CSVs (with Transponder and Lap 1…N columns) and passings files are detected automatically when you use Import timing. See File import.